Thermal Insulation Auto Drain Valve 1.0Mpa Float Thermostatic Steam Trap

Thermal Insulation Structure SP3, SP3F Series Thermodynamic Steam Traps

I. Overview

Widely used in petroleum, chemical, metallurgy, rubber, papermaking, printing and dyeing and other low-pressure steam mains, heat tracing pipes and small heating equipment.

2.Main overall dimensions

3. Use and maintenance

Fire gate valves are often used in automatic sprinkler fire pipeline systems, rotating handwheels to control the opening and closing of water sources in water supply pipelines.

4. Installation:

(1) Handwheels, handles and transmission mechanisms are not allowed to be used for lifting, and collisions are strictly prohibited.

(2) Before installation, check whether the product model, tag and specification are consistent, and check whether the parts of the whole machine are defective and loose.

(3) Before installation, the pipeline should be cleaned, and there should be enough straight pipe section at the valve inlet, and equipped with a filter.

(4) The installation site should consider the comprehensive personnel and equipment, even if it is operated, it is conducive to disassembly and maintenance.

(5) The signal box is connected to the fire protection system circuit.

Thermal Insulation Auto Drain Valve 15mm

Float Thermostatic Steam Trap 15mm

1.0Mpa Float Thermostatic Steam Trap

Thermal Insulation Auto Drain Valve 1.0Mpa Float Thermostatic Steam Trap Images